Climax 96229 Operating Manual Download Page 3 | Manualshive

Page: 3 / 86

background image

P/N 98061, Rev. 2

Page A

©2021 CLIMAX or its subsidiaries.

All rights reserved.

Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, dissem-
inated, downloaded, or stored in any storage medium, without the express prior written consent of CLIMAX.
CLIMAX hereby grants permission to download a single copy of this manual and of any revision hereto onto
an electronic storage medium to be viewed and to print one copy of this manual or any revision hereto, pro-
vided that such electronic or printed copy of this manual or revision must contain the complete text of this
copyright notice and provided further that any unauthorized commercial distribution of this manual or any
revision hereto is prohibited.

At CLIMAX, we value your opinion.

For comments or questions about this manual or other CLIMAX documentation, please e-mail

[email protected]

.

For comments or questions about CLIMAX products or services, please call CLIMAX or e-mail

[email protected]

. For quick and accurate service, please provide your representative with the following:

•

Your name

•

Shipping address

•

Telephone number

•

Machine model

•

Serial number (if applicable)

•

Date of purchase

CLIMAX World Headquarters

2712 East 2nd Street
Newberg, Oregon 97132 USA

Telephone (worldwide): +1-503-538-2815
Toll-free (North America): 1-800-333-8311
Fax: 503-538-7600

H&S Tool World Headquarters

715 Weber Dr.
Wadsworth, OH 44281 USA

Telephone: +1-330-336-4550
Fax: 1-330-336-9159

hstool.com

CLIMAX | H&S Tool (UK Headquarters)

Unit 7 Castlehill Industrial Estate
Bredbury Industrial Park
Horsfield Way
Stockport SK6 2SU, UK

Telephone: +44 (0) 161-406-1720

CLIMAX | H&S Tool (European Headquarters)

Am Langen Graben 8
52353 Düren, Germany

Telephone: +49 (0) 242-191-7712
E-mail:

[email protected]

CLIMAX | H&S Tool (Asia Pacific Head-
quarters)

316 Tanglin Road #02-01
Singapore 247978

Telephone: +65-9647-2289
Fax: +65-6801-0699

CLIMAX | H&S Tool (Middle East Headquarters)

Warehouse #5, Plot: 369 272
Um Sequim Road
Al Quoz 4
PO Box 414 084
Dubai, UAE

Telephone: +971-04-321-0328

«
1
2
3
4
5
...
»

Summary of Contents for 96229























































































Reviews:

No comments

Related manuals for 96229

Ettan IPGphor 3

Brand: GE Pages: 64

Brand: GE Pages: 56

Brand: GE Pages: 132

Brand: GE Pages: 16

Brand: GE Pages: 474

Brand: C.M.O Pages: 10

Brand: Above All Pages: 4

Martin ERA 800 Performance

Brand: Harman Pages: 32

Martin ERA 600 Performance

Brand: Harman Pages: 32

Brand: Hardt Pages: 22

Brand: Sabre Pages: 2

Brand: Tanco Pages: 112

Brand: Qtx Pages: 6

2261998USBA1-XX

Brand: MMF POS Pages: 5

Brand: U.S.SAWS Pages: 21

ClusterStor H-6167

Brand: Cray Pages: 39

Elitco Lighting C202

Brand: ELEGANT Pages: 2

Brand: NISBETS Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands