Commissioning / Setup
Setting up multiple appliances with the
PNE
Touch Pad Control
www.climatetechnologies.com.au
Page 1: ...Commissioning Setup Setting up multiple appliances with the PNE Touch Pad Control www climatetechnologies com au...
Page 2: ...fect using the PNE connection loom For evaporative air conditioning the control is fitted with a spare comms port The comms ports are parallel connected on the control board so there is no required se...
Page 3: ...it Step 4 Move to the next unit and perform the same procedure as in Step 2 and Step 3 to allocate a code number to each unit Once the unit is coded the power can remain turned on to the unit Each uni...
Page 4: ...ssfully If the units have been allocated to different zones turn the zones on to check unit operation Step 4 If a unit did not code correctly restart the process from CODE ZONE ALLOCATION OF ADDITIONA...
