EVAPORATIVE AIR COOLER CM-18000
www.climateplus.ae
MAINTENANCE
For best results and long term operation, regular
maintenance is essential.
Remove the filter pad by unscrewing the 4 screws on the rear of the cooler, then lift the pad
and pull out at the bottom to release. To replace the pad slide up into the slot under the top of
the cooler, push in at the bottom and allow dropping into the lower slot.
Clean the pad from the inner-side to out-side of pad (inner side is towards motor). Never use
any liquid detergent. Never use pressurized water, as it may cause damage to the pad.
3) Unscrew the drainage lid to let dirty water flow out, then clean the water tank thoroughly
with a soft cloth. Wash off dirt on the water sensor, water pump and the float valve. Rinse
thoroughly.
Use mild soft clean cloth when cleaning the cooler casing. Do not use any caustic chemical
detergent that may cause damage to the surface of the cooler.
To prevent buildup of algae and biological organisms in the reservoir, regularly add
chlorine/bromine tablets as per tablet manufacturer recommendation of evaporative cooler
reservoirs.
-07
