8
3- USING THE INERTIA RADIATOR, SMART TOUCH
RANGES
3.1 STARTING THE DEVICE
First, plug in the power cord to a mains power outlet, and click the switch on the right. The
display starts, shows a welcome message, and shows OFF. To start the device, press the
“POWER” button; set temperature appears on the screen.
3.2 SETTING DATE AND TIME
A.
Press OK for a few seconds.
B.
The display shows CONFIG TIME. If not, press
until you see and press OK.
C.
Set the hour (H) using
; to validate press OK.
D.
Set the minutes (M) using
; to validate press OK.
E.
Press
to select the day of the week (DAY 1 Monday, DAY 2 Tuesday); to validate press
OK.
Date and time are now set. Press ESC and select the comfort temperature pressing the
arrows. Your device is now working!
3.3 MANUAL MODE
In this mode, the device works as per factory set. All you have to do is press
to select
the desired temperature.
The set temperature can be modified from 15º C to 28º C in intervals of 0.5.
1. “POWER /ESC” button: Turn on
and off the device / allows moving back
from any menu.
2. MODE/OK” button: to access main
menu and select or confirm the desired
option.
3. “UP/DOWN” arrows
: allow to set
the values and navigate through the
different options of the menus.
4. DISPLAY: shows the different
options and desired values.
5. RED DOT: if flashing, the device is
working in PILOT WIRING mode, if
not, then it is working in automatic as
per the set programming.
Summary of Contents for SMART TOUCH 1000
Page 1: ...INSTALLATION MANUAL AND USER GUIDE SMART TOUCH RANGES...
Page 2: ...2...