CLIMASTAR SMART TOUCH 1000, Installation Manual And User'S Manual, Page: 6 / 16

6

The appliance must be installed in such a way that switches
and other control devices cannot be touched by a person
using a bath or shower.

The installation must be carried out in accordance with the
current electrical regulations.

The heater is fitted with a flexible cable size 3 x 1.00 mm2
for electrical connection. It may be used to connect the
heater to the fixed wiring of the premised through a suitable
connection box positioned adjacent to the heater.

The supply circuit to the heater must incorporate a double
pole isolating switch having a contact separation of at least
3 mm.

If the flexible supply cord is damaged, it must be replaced
by a repair workshop recognised by the manufacturer, in
order to avoid hazard.

All models are supplied with an electrical interrupt cut-out.
This will switch off the heater if, for any reason, it
overheats. Should the cut-out operate, turn the heater off
and remove the cause for the overheating. The cut-out will
be reset automatically.

The presence in the air of particles of smoke, dust and other
pollutants could, in time, discolour the walls and surfaces
around the heater.