12
Installing the device easily
The instructions below have been prepared to assist you in the installation of the
device. Please read the instructions thoroughly and carefully before installing the
device. Following all the steps as described guarantees your safety and the
functionality and endurance of the thermostat and air conditioner.
Turn off the respective circuit
breaker. Do not try to install the
device while the circuit breaker is on.
It may not only put your safety at risk
but also the sparks produced while
securing the wires may shorten the
life of some components within the
device.
‚
Use a crimping tool to secure the
wire ferrules supplied with the device
on the wires to prepare them to be
screwed into the terminals. The best
w i re s i ze i s AW G 1 6 ( 1 . 5 m m
diameter), but wires up to AWG12
(2.5 mm diameter) can also be used
in the thermostat terminals.
Installing the device easily
