For retrofitted to an existing heat pump
For new installation of heating pump
S t e p
C
– A s s e m b l y o f t h e h e a t i n g t r a y
Place the Pancake between the vibration dampers on
the wall/ground stand or on the consoles, with the
tray adapter at the back and the cable to the right.
Before locking the nuts on the front vibration dampers,
place the drainage tray under the pump by slightly inclining
the pump at the back and in this way opening up sufficient
space to feed in the tray from the front.
S t e p
D
– A s s e m b l y o f t h e d r a i n a g e h o s e & h e a t i n g c a b l e
( i f a k i t i s p u r c h a s e d )
1.
Pull the heating cable through the tray adapter.
2.
Pull the heating cable through the drainage hose (easiest with the draw cable) and affix
the hose to the tray adapter, then secure the hose with a tie strap. Attach the heating cable
in the tray’s cable support.
When retrofitted to an existing heating pump on wall/ground stand
3
