©
2006
Directed Electronics
27
Feature Descriptions
The features of the system are described below. Features that have additional settings that can be
selected only when programming with the 998T Bitwriter
®
are indicated by the following
icon:
Menu #1 - Basic Features
1-1 ACTIVE/PASSIVE ARMING:
When active arming is selected, the system will only arm when
the transmitter is used. When set to passive, the system will arm automatically 30 seconds after the
last door is closed. To alert the consumer of passive arming, the siren will chirp 20 seconds after the
door is closed. This provides the consumer with an audible indication prior to the system actually
arming. At the 30 second mark, the system will arm but the siren will not chirp. This feature will
be affected by one time bypass if programmed on.
1-2 CHIRPS ON/OFF:
This feature controls the chirps that confirm the arming and disarming of
the system.
1-3 IGNITION CONTROLLED DOOR LOCK ON/OFF:
When turned on, the doors will lock
three seconds after the ignition is turned on, if the doors are closed.
1-4 IGNITION CONTROLLED DOOR UNLOCK ON/OFF:
When turned on, the doors will
unlock when the ignition is turned off.
1-5 ACTIVE/PASSIVE LOCKING:
If passive arming is selected in menu item 1-1, then the system can
be programmed to either lock the doors when passive arming occurs, or only lock the doors when the
system is armed via the transmitter. Active locking means the system will not lock the doors when it
passively arms. Passive locking means that the system will lock the doors when it passively arms.
NOTE: Remember, when passive arming is selected, the unit will chirp 20 seconds after the last
door is closed. The system does not actually arm or lock the doors until 30 seconds after the door
has been closed.
1-6 PANIC WITH IGNITION ON:
This step controls whether or not the Panic Mode is available
with the ignition on. In some states, there are laws prohibiting a siren from sounding in a moving
vehicle. This feature makes the system compliant with these regulations.
