background image

Valet mode 

Whenever the system is put in valet mode, all of the system’s security features are
switched off. At various times, you will need to turn the system off. For instance,
when having your car serviced, washed or parked by a valet.

NOTE: If you temporarily lose the use of your remote controls, you can disarm
the system by enabling valet mode.

To enable valet mode 

1. Turn the ignition switch to its “ON” position or start the engine.
2. Flip the valet switch. The system’s LED will glow continually for on-going

visual confirmation of valet mode.

To exit valet mode

1. Turn the ignition switch to its “ON” position or start the engine.
2. Flip the valet switch. The system’s LED will turn off to confirm that the system

is in its normal operating mode.

Remote controlled valet mode entry and exit

You can even enable or exit valet mode via your remote control. All you need to do
is transmit channel 5 (red side-switch down, then press button I or, on the optional
ACG remote control, one press of the side LevelShift button, then press button 1).
In addition to the previously noted indications, two indicator light flashes will
confirm that you have remotely enabled valet mode, while a single flash confirms
exiting of valet mode.

Keyless entry in valet mode

Even if valet mode is enabled, you can still remotely control the convenience
features. For instance, simply press button I as if you were disarming and the doors
will unlock (confirmed by one indicator light flash) and the interior lights will turn
on. Press button 1 again and the doors lock (confirmed by two flashes). You can
also use the other channels to activate options such as an optional remote boot
release or optional remote engine starting.

Piezo Sensor

The Piezo Sensor detects intrusion-related vibrations and impacts. For an even
greater level of security, consider an optional Clifford Glass Tampering Sensor,
which detects any attempts to break any of the vehicle windows and/or a Proximity
Sensor, which uses radar to detect movement within the passenger compartment
(particularly recommended for convertibles).

9

Summary of Contents for Falcon 2

















Reviews: