www.directed.com
10
cle has a positive switched interior light circuit, attach this wire to a 12 volt constant source.
secondary harness wire connection guide
secondary harness wiring diagram
___
___
___
___
___
___
___
___
secondary harness wiring guide
N
NO
OTTEE:: For the wires not discussed below, please refer to the Door Lock Harness
Wire Connection Guide section.
h2/4 brown/white brake light output
When activated by the Blackjax* feature this wire powers the brake light circuit from
the 12-volt source on H2/8.
h2/8 brown/red brake light (+) 12V input
This is the polarity source for the brake light output and must be 12 volt constant.
pigtail harness wire connection guide (h3
and h4)
h3 connector (male)
Locate the ignition and starter wires using a multimeter. Cut the appropriate wire and
attach the key side and car side wires to the corresponding wires on the four-pin
immobiliser harness.
BROWN/RED
Brake Light (+) 12V Input (87)
GREEN/BLACK
Lock 30 (Common)
VIOLET
Unlock 87 (Normally Open)
BLUE/BLACK
Unlock 30 (Common)
BROWN/WHITE
Brake Light Output (30)
VIOLET/BLACK
Lock 87 (Normally Open)
WHITE/BLACK
Lock 87A (Normally Closed)
BROWN/BLACK
Unlock 87A (Normally Closed)
H2/1
H2/2
H2/3
H2/4
H2/5
H2/6
H2/7
H2/8
