Clifford 562C, User Manual

Page: 17 / 30

13
©
2004 Directed Electronics, Inc.
When you are ready to drive the vehicle:
1. Insert the ignition key and
turn it to the ON (not the
START) position.
2. Press the brake pedal.
NOTE: If the brake pedal is pressed before the key is in the ON position,
the engine will shut down.
While the vehicle is running during remote start operation, the
system will monitor the vehicle and will automatically shut down the
engine if the system receives any of the following shut-down inputs:
■
The brake pedal is pressed.
■
The hood is opened.
■
The shutdown toggle switch is put into the OFF position.
■
The pre-programmed run time (12, 24, or 60 minutes) has elapsed.
■
Transmitter button is pressed twice in 3 seconds to start
the vehicle.