18
Cut
along
dotted
line
and
fold
fo
r
a
quick
and
e
as
y
refer
ence
to
k
eep
in
your
pur
se
or
w
allet
©
2004 Directed Electronics, Inc.
Input:
Any physical connection to the security system. An input
can be provided through a sensor, pinswitch or by existing systems
in the vehicle, such as ignition or courtesy lights.
LED:
A red light mounted inside the vehicle, at a location deter-
mined by the installer. The LED indicates the status of your system
and also reports triggers and faults in the system or sensors.
Siren:
A noise generating device, usually installed in the engine
compartment of the vehicle. The siren generates the chirps and
tones heard when the system is triggered.
Transmitter:
A hand-held, remote control that operates the vari-
ous functions of the security system.
Trigger or Triggered Sequence:
The "setting off" or "tripping" of
the alarm. A triggered sequence consists of the siren sounding and
the parking lights flashing for 30 seconds.
Valet Switch:
A small, push-button switch mounted inside the
vehicle, at a location determined by the installer. This switch is
used to override the alarm when a transmitter is lost or damaged,
or can be used to put the system into Valet Mode.
Warn-Away Response:
Light impacts to the vehicle generate the
warn-away response, which consists of several seconds of siren
chirps and flashing parking lights.
Zone:
A zone is a separate input that the alarm recognizes as
unique. Each input to the system is connected to a particular zone.
Two or more inputs may share the same zone.
Summary of Contents for 22 CX 980074 series
Page 2: ......
Page 5: ...iii 2004 Directed Electronics Inc...
