Clifford 22 CX 980074 series, User Manual

Page: 18 / 25

13
©
2004 Directed Electronics, Inc.
ments are listed in the following table, along with spaces to write
in any optional sensors or switches that you have had installed.
ZONE
(Number of
DEALER-INSTALLED
LED Flashes)
DESCRIPTION OPTIONS
1
Instant trigger for optional sensor,
hood or trunk pins
2
A heavier impact detected by
the on-board impact sensor
3
Door switch trigger
5
Ignition trigger
NOTE: The LED does not report when the warn-away response has been
activated; it only reports triggered sequences.
Stealth Coding
™
Technology
The receiver and transmitter use mathematical formulas called
algorithms to change their codes each time the transmitter is used.
This Stealth Coding ™ Technology has been developed to increase
the security of the unit. By following this set code sequence, the
receiver and transmitter stay synchronized, even if the transmitter
is used out of range of the vehicle. If, however, the transmitter is
pressed many times out of range, or the battery is removed, the
transmitter may get temporarily out of sync and fail to operate the
system. To resynchronize the transmitter, simply press