clientron VD1220, User Manual

Page: 7 / 53

VD1220 User Manual
Version: 1.0
4 | 50
Installing Model VD1220
3
Step 4: Connect to your computer
Connect the RS232 connector to the male equivalent com port on your
computer or terminal. Provide power to the DB9F connector using
either a cable connection or an external adapter.
Step 5: Turn on your computer
Turn on your computer, it should boot up normally. The pole display will
show a self-diagnostic status and then will show a welcome message.
Step 6: Turn to following chapter to know more information.
Please refer to chapter 7 for function setting, chapter 8 for system
command detail, chapter 9 for operation guide of utility and chapter 10
for character set.