clientron VD1220, User Manual

Page: 29 / 53

VD1220 User Manual
Version: 1.0
26 | 50
System Command Detail
8
LF 0A Move cursor down
ESC [ H 1B 5B 48 Move cursor to home position
HOM 0B Move cursor to home position
ESC [ L 1B 5B 4C Move cursor to left-most position
CR 0D Move cursor to left-most position
ESC [ R 1B 5B 52 Move cursor to right-most position
ESC [ K 1B 5B 4B Move cursor to bottom position
ESC [ x y 1B 6C x y Move cursor to specified position
1x20 (column) ; y
≦≦
=1,2 (row)
ESC @ 1B 40 Initialize display
ESC W s x1
x2 y
1B 57 s x1 x2 y Enable or disable the window range at horizontal
scroll mode
s=0,1 (disable, enable)
1
≦
x1
≦
x2
≦
20 (column) ; y=1,2 (row)
CLR 0C Clear display screen, and clear string mode
CAN 18 Clear cursor line, and clear string mode
ESC * n 1B 2A n Brightness adjustment
1
≦
n
≦
4
ESC & s n m
[a(pl..p5)]
(m-n+1)
1B 26 s n m
[a(pl..p5)]
(m-n+1)
Define download characters
s=1 ; 32
≦
n
≦
m
≦
126 ; a=5
( p1..p5 = pattern1..pattern5 )
ESC ? n 1B 3F n Delete download characters
32
≦
n
≦
126 (n=character code)
ESC % n 1B 25 n Select / cancel download character set.
n=0, canceled ; n=1, selected
ESC _ n 1B 5F n Set cursor ON/OFF
n=0,1 (Off,On)
ESC f n 1B 66 n Select international fonts set
ESC c n 1B 63 n Select fonts, ASCII code or JIS code
ESC = n 1B 3D n Select peripheral device
n=1, printer ; n=2, display ; n=3, printer & display
(REMARK)
* While using command “ESC Q A” or “ESC Q B”, these two commands could
be used combining with terminal printer - TP 2688 or TP3688
* If using command “ESC Q A” or “ESC Q B”, others commands can’t be used
except using command “CLR” or “CAN” to change operating mode.
* If using command “ESC Q D”, message on upper line will move continuously