Physical installation
Warning! The fixture must be either fastened to a flat surface such as a stage or wall, or clamped to a truss or
similar structure in any orientation using a rigging clamp. Do not apply power to the fixture if it is standing freely
or the fixture can be moved.
Warning! If the fixture can cause injury or damage it if falls, attach an approved safety cable to one of the safety
cable attachment points on the base (see “Fixture overview” on page 6).
Check that all surfaces to be illuminated are minimum 200 mm. from the fixture, that combustible materials
(wood, fabric, paper, etc.) are minimum 100 mm. from the head, that there is free airflow around the fixture and
that there are no flammable materials nearby.
Make sure that it is impossible for the moving head to collide with another fixture or other object...
The
can be fastened to a fixed flat surface that is oriented at any angle. Check that the surface can support at least
10 times the weight of all fixtures and equipment to be installed on it.
Warning! The supporting surface must be hard and flat or air vents in the base may be blocked, which will cause
overheating. Fasten the fixture securely. Do not stand it on a surface or leave it where it can be moved or can fall
over. Attach a securely anchored safety cable to the safety cable attachment point (see “Fixture overview” on
page 6) if the fixture is to be installed in any location where it may fall and cause injury or damage if the primary
attachment fails.
fixture
Fastening the fixture to a flat surface
3
.
Block
access
under
the
work
area
.
Working
from
a
stable
platform
,
hang
the
fixture
on
the
truss
with
the
arrow
on
the
base
towards
the
area
to
be
illuminated
.
Tighten
the
rigging
clamp
.
4
.
Secure
the
fixture
against
clamp
failure
with
a
secondary
attachment
such
as
an
approved
safety
cable
that
is
rated
for
the
weight
of
the
fixture
using
one
of
the
attachment
points
at
the
edges
of
the
base
(
see
“
Fixture
overview
”
on
page
6
).
Do
not
use
any
other
part
of
the
fixture
as
a
safety
cable
attachment point
.
5
.
Check
that
the
head
will
not
collide
with
other
fixtures
or
objects
.
10