WWW.CLF-LIGHTING.COM
8
menu navigation
Press MENU button to navigate different setting pages.
1.
DMX address setting page
When it shows ADDR, press ENTER button to enter into the setting page of DMX address. Press UP or DOWN to increase or decrease
the address value. After finished setting, press ENTER button again to back to page ADDR.
2.
DMX address setting page
When it shows “CH-1” , press ENTER button to set LED color under button one. Through UP and DOWN button, user can realize the
color setting. After finished setting, press ENTER again to exit to page CH-1. The LED’s color could be set to OFF, 9 colors (Co1-Co9)
and change color automatically (rand).
1.
When set to OFF, the LED would not light up.
2.
9 colors are as following:
• Co 1: Red
• Co 6: Orange
• Co 2: Green
• Co 7: Yellow
• Co 3: Blue
• Co 8: Sky blue
• Co 4: Pink
• Co 9: White
• Co 5: Purple
After setting the above color, the LED will show the corresponding color when press the button A on the remote (CH-1 matches with
button A). Under Random mode, the LED will change color freely, the interval is 1.
Note:
Under DMX control, the LED’s color would be controlled by DMX controller instead of this color setting page.
There are four color standby modes, namely CH-1, CH-2, CH-3 and CH-4. Different channels match with different button on the wireless
remote.
3.
Wireless remote setting
When it shows REMO, press ENTER button to set wireless remote function.
Press UP button, it will show ON. This means that the wireless control function is activated, and it will show the registering page when
the machine is powered on. Press DOWN button, it will be OFF. This means that the wireless control function is shut off. And it will not
show the wireless remote registering page when the machine is powered on. After setting, press ENTER button again to exit to page
REMO.
4.
No-fluid protection setting page
When it shows OIL, press ENTER button to set the status of low-fluid protection. Press UP button, it will show ON. This means that the
low-fluid protection function is activated. Press DOWN button, it will be OFF. This means that low-fluid protection function is shut off.
After setting, press ENTER button again to exit to page OIL.
This machine supports wireless remote control, DMX control, fluid sensor, stop immediate function and LED lights (3W LED, 32 in total).
DMX control is prior to wireless remote control. Fog duration is about 7S.
1.
LED lights are controlled by the digital display and DMX.
2.
LED lights instruction
3.
Under wireless remote control, LED color is set according to the digital display. The LED’s on/off synchronize with the Fog’s on/off.
4.
Under DMX control, fog and LED are separate. It has 7 channels to control the effects of LED lights. Please refer to below DMX
instruction for the details.