Clevo XMG-U505, Service Manual

Page: 18 / 25

Disassembly
Removing the M.2 SSD Module 2 - 9
2.Disassembly
Removing the M.2 SSD Module
Note that the
SSD
(if installed) is beside the HDD bay.
1. Turn off the computer, and turn it over, remove the battery ( page 2 - 5 ).
2. Remove the screw from the SSD ( Figure 5a ) .
3. The SSD module will pop-up ( Figure 5b ) .
4. Lift the SSD module up and off the computer ( Figure 5c
)
.
5. Reverse the process to install a new SSD (make sure that the hexagonal screw is in the correct location
depending upon the size of the module).

2. SSD Module
• 1 Screw
Figure 5
M.2 SSD Module
Removal
a. Remove the screws.
b. The SSD module will pop
up.
c. Lift the SSD module out.
1
6
2
6
2
3
a. b.
2
1
2
c.
3
3