35
Engl
ish
Intel
®
Rapid Start Technology
Intel® Rapid Start Technology
can resume power from
Hibernation within 5 to 6 seconds and can remember your
computer's previous state with zero power.
System Requirements to support
Intel® Rapid Start
Technology
:
• Rapid Start Technology should be enabled in the BIOS’s
Advanced menu.
• Intel® Rapid Storage Technology software installed.
• A Solid State Drive (SSD) with a minimum capacity of
18.6GB.
Intel® Rapid Start Technology Config-
uration
1.
Enable/disable
Intel(R) Rapid Start Technology
from the
BIOS.
2.
Go the
Windows
control panel and double-click
Administrative Tools
(
System and Security
)
> Computer
Management > Storage > Disk Management
.
3.
Right-click the SSD and select
Shrink Volume
from the menu.
4.
Enter the figure,
which should be equal to amount of system
memory (RAM) in your computer,
in “
Enter the amount of
space to shrink in MB
”.
5.
Click
Shrink
(any unallocated file space may be formatted for
storage use).
6.
Run the Desktop app and right-click the lower left hot corner (or
use the
Windows Logo Key
+
X
key combination) and
select
Command Prompt (Admin)
.
7.
Type “
DISKPART
”.
8.
At the DISKPART command type “
list disk
”.
9.
Type “
select disk
#
” (
#
is disk number where you want to
create the store partition, so refer to the results obtained from
"
list disk
" for exact disk number).
10. The message “
Disk # is now the selected disk.
” will appear.
11. Type “
create partition primary
”.
12. A “
DiskPart succeeded in creating the specified partition
.”
message should appear.
13. Type “
detail disk
”.
