Clevo W940AU, Service Manual

Page: 42 / 102

Disassembly
2 - 18 Installing and Removing the mSATA Module
2.Disassembly
Installing and Removing the mSATA Module
mSATA Module installation procedure:
1. Turn off the computer, turn it over, remove the battery ( page 2 - 5 ), component bay cover ( page 2 - 12 ) and 3G
( page 2 - 17 ).
2. Carefully remove the screw ( Figure 13a ) .
3. The interface adaptor will pop-up, and you can remove it from the computer ( Figure 13b ).
4. Insert the SSD module ( Figure 13c ), and you can tighten the screw ( Figure 13d ).
1
2
3 4
b. c. a.
1
3
d.
2
4

Antenna Cable
Pay attention, and be careful not to damage
the antenna cable on the side when installing
the module or interface adaptor.

2. Interface Adaptor
3. mSATA Module
• 2 Screws
Figure 13
SSD Module
Installation
a. Remove the screw.
d. Remove the interface
adaptor.
c. Install the module.
d. Tighten the screw.