Clevo W25CEV, Service Manual

Page: 35 / 103

Disassembly
Removing and Installing a Processor 2 - 11
2.Disassembly
7. Turn the release latch towards the unlock symbol to release the CPU ( Figure 7d ).
8. Carefully (it may be hot) lift the CPU up and out of the socket ( Figure 7e ).
9. Reverse the process to install a new CPU.
10. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!).
7
8
Figure 7
Processor Removal
(cont’d)
f. Turn the release latch to
unlock the CPU.
g. Lift the CPU out of the
socket.
f.
g.

Caution
The heat sink, and CPU area in
general, contains parts which are
subject to high temperatures. Allow
the area time to cool before remov-
ing these parts.
Unlock Lock
7
8
7

8. CPU