Disassembly
Removing the Wireless LAN Module 2 - 13
2.Disassembly
Removing the Wireless LAN Module
1.
Turn
off
the computer, turn it over, remove the battery (
page 2 - 6
).
2.
The Wireless LAN module will be visible at point
on the mainboard (
Figure 9a
).
3.
Carefully disconnect the cables
&
, and then remove the screw
(
Figure 9b
)
4.
The Wireless LAN module
(
Figure 9c
) will pop-up, and you can remove it from the computer.
1
2
3
4
5
b.
c.
a.
5
1
5
2
3
4
5.Wireless LAN Module
•
1 Screw
Figure 9
Wireless LAN
Module Removal
a. Locate the WLAN.
b. Disconnect the cables
and remove the screw.
c. The WLAN module will
pop up.
Note: Make sure you
reconnect the antenna
cable to the “1 + 2”
socket (
Figure 9b
).
Summary of Contents for P950HR
