manualshive.com logo in svg

Clevo P870KM, User Manual

The Clevo P870KM Service Manual is a comprehensive user guide for owners of this high-performance laptop. You can easily download this manual for free from our website, providing detailed instructions, troubleshooting tips, and helpful information. Enhance your product experience by accessing the user manual at manualshive.com.

Share
Download
background image

Modules

6 - 6 Setting Up SATA RAID, Optane™ or AHCI Mode

6

RAID Setup - UEFI Enabled

To configure your RAID (Redundant Array of Independent Disks) system in Strip-
ing (RAID 0) or Mirroring (RAID 1) modes (see 

Table 6 - 1, on page 6 - 4

) you will

require 

two

 

identical

 hard disks or solid state drives.

You need to setup a RAID before installing your 

Windows 10 

operating system, and

you will need to prepare the following in order to do so.
==========================================================
• The 

Microsoft Windows 10 OS DVD

.

• An attached external DVD drive.
• A hard disk installed in the Primary HDD bay and a 

second

 (identical) hard disk 

installed in the Secondary HDD bay.

OR

Two Identical solid state drives.

• The 

Device Drivers & Uti User’s Manual 

disc.

==========================================================

1.

Start-up your notebook computer and press <F2>

 

to enter the 

BIOS

.

2.

Go to the 

Boot

 menu, select 

UEFI Setting

 and press <Enter> (see page 

5 - 20

).

3.

Set 

UEFI Boot

 to “

Enabled

”.

4.

Press <Esc> to exit the menu and go to the 

Advanced

 menu.

5.

Select 

SATA Mode 

(see page 

5 - 15

), press <Enter> and select “

Intel RST 

Premium

”.

6.

Press <F4> and <Yes> to “

Save Changes and Reset

”.

7.

As the computer restarts press <F2>

 

to enter the 

BIOS 

again.

8.

Go to 

Intel(R) Rapid Storage Technology

 (

Advanced

 menu) and press <Enter>.

Summary of Contents for P870KM











































































































































































































































































































































Reviews:

No comments

Related manuals for P870KM

NEC VERSA 2000 WINDOWS 98 - UPGRADE INFORMATION Service And Reference Manual preview
VERSA 2000 WINDOWS 98 - UPGRADE INFORMATION
Brand: NEC Pages: 82
IBM ThinkPad R40e Servisna Navodila In Navodila Za Odpravljanje Težav preview
ThinkPad R40e
Brand: IBM Pages: 94
IBM ThinkPad R40e Příručka Pro Základní Servis A Odstraňování Problém preview
ThinkPad R40e
Brand: IBM Pages: 102
IBM ThinkPad R40e Manual Til Service Og Fejlfinding preview
ThinkPad R40e
Brand: IBM Pages: 96
IBM ThinkPad R40e Guida All’Assistenza E Alla Risoluzione Dei Problemi preview
ThinkPad R40e
Brand: IBM Pages: 96
IBM ThinkPad R40e Manual De Assistência E Resolução De Problemas preview
ThinkPad R40e
Brand: IBM Pages: 98
IBM ThinkPad R40 Hardware Maintenance Manual preview
ThinkPad R40
Brand: IBM Pages: 178
IBM ThinkPad i Series Manual preview
ThinkPad i Series
Brand: IBM Pages: 162
IBM ThinkPad X30, ThinkPad X31 (MT 2672 Hardware Maintenance Manual preview
ThinkPad X30, ThinkPad X31 (MT 2672
Brand: IBM Pages: 138
IBM THINKPAD A30 Guía De Servicio Y De Resolución De Problemas preview
THINKPAD A30
Brand: IBM Pages: 94
IBM THINKPAD I 1200 - User Manual preview
THINKPAD I 1200 -
Brand: IBM Pages: 162
Targus Chill Mat Quick Start preview
Chill Mat
Brand: Targus Pages: 4
Targus Chill Mat Quick Start Manual preview
Chill Mat
Brand: Targus Pages: 2
Gateway Solo 3450 Connection Manual preview
Solo 3450
Brand: Gateway Pages: 1
Fujitsu V1020 - LifeBook - Core 2 Duo GHz (French) Manual D'Utilisation preview
V1020 - LifeBook - Core 2 Duo GHz
Brand: Fujitsu Pages: 168
Monster TULPAR T5 V20.3 User Manual preview
TULPAR T5 V20.3
Brand: Monster Pages: 156
Justice Tech Solutions Securebook 5.0 Manual preview
Securebook 5.0
Brand: Justice Tech Solutions Pages: 6
Clevo W940AU Service Manual preview
W940AU
Brand: Clevo Pages: 102

Brands by name

Popular brands

Load more brands