manualshive.com logo in svg

Clevo P870KM, User Manual

Share
Download
Clevo P870KM User Manual Download Page 141

BIOS Utilities

Advanced Menu 5 - 15

5

If you wish to change your SATA mode to/from AHCI/Intel RST Premium mode
you will receive a message (see overleaf) to notify you that doing so may prevent
your operating system from booting, and may require a reinstall of the OS. If you do
wish to change the SATA mode then backup any necessary data on your hard disk(s)
as you will need wipe the disks clean in order to prevent system problems.

Power On Boot Beep (Advanced Menu)

Use this menu item to enable/disable the beep as the computer starts up.

Battery Low Alarm Beep

 

(Advanced Menu)

Use this menu item to enable/disable the battery low alarm beep.

SATA Mode 

Selection

If you have installed the

Windows 

OS with ei-

ther 

AHCI or Intel RST

Premium

 mode en-

abled, 

DO NOT

 disable

the set mode

 

(if you wish

to disable the set mode
you will need to reinstall
the 

Windows 

OS).

Note that your system
can be set up as a
RAID OR to support In-
tel® Optane™, it can-
not be set to support
both systems.

Figure 5 - 7

SATA Mode Change 

Notification

Summary of Contents for P870KM











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands