Disassembly
Removing the Primary System Memory (RAM) 2 - 11
2.Disassembly
5.
Pull the latches to release the second module if necessary.
6.
Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
7.
The module’s pin alignment will allow it to only fit one way. Make sure the module is seated as far into the slot as it
will go. DO NOT FORCE the module; it should fit without much pressure.
8.
Press the module in and down towards the mainboard until the slot levers click into place to secure the module.
9.
Replace the bay cover and screws.
10. Restart the computer to allow the BIOS to register the new memory configuration as it starts up.
Contact Warning
Be careful not to touch the metal pins on the module’s connecting
edge. Even the cleanest hands have oils which can attract particles,
and degrade the module’s performance.
Summary of Contents for P870KM
