Disassembly
Removing and Installing the Processor 2 - 19
2.Disassembly
Processor Installation Procedure
1.
Insert the CPU
, pay careful attention to the pin alignment (
Figure 15a
), it will fit only one way (DO NOT
FORCE IT!), and turn the release latch
towards the lock symbol
(
Figure 15b
).
2.
Remove the sticker
(
Figure 15c
) from the heat sink unit.
3.
Insert the heat sink unit
as indicated in
Figure 15c
.
4.
Tighten the CPU heat sink screws in the order
,
,
&
(the order as indicated on the label and
Figure
15d
).
5.
Replace the CPU fan, component bay cover and tighten the screws (
page 2 - 17
).
A
B
C
D
1
2
3
4
c.
b.
d.
B
a.
C
D
1
4
2
Note
:
Tighten the screws in the order 1-2-
3-4 as indicated on the label.
3
A
Figure 15
Processor
Installation
a. Insert the CPU.
b. Turn the release latch to-
wards the lock symbol.
c. Remove the sticker from
the heat sink unit and in-
sert the heat sink.
d. Tighten the screws.
A. CPU
D. Heat Sink
•
4 Screws
Summary of Contents for P150EM
