Clevo NP50HH, Service Manual

Page: 36 / 112

Disassembly
2 - 12 Removing the Wireless LAN Module
2.Disassembly
Removing the Wireless LAN Module
1. Turn off the computer, turn it over, remove the battery ( page 2 - 6 ).
2. The Wireless LAN module will be visible at point on the mainboard ( Figure 8a ).
3. Carefully disconnect the cables & , and then remove the screw ( Figure 8b )
4. The Wireless LAN module ( Figure 8c ) will pop-up, and you can remove it from the computer.
1
2 3 4
5
b.
c. a.
5
1
5
2
3
4

5.Wireless LAN Module
• 1 Screw
Figure 8
Wireless LAN
Module Removal
a. Locate the WLAN.
b. Disconnect the cables
and remove the screw.
c. The WLAN module will
pop up.
Note: Make sure you
reconnect the antenna
cable to the “1 + 2”
socket (
Figure 8b ).