Clevo NP50HH, Service Manual

Page: 32 / 112

Disassembly
2 - 8 Removing the M.2 SSD Module
2.Disassembly
Removing the M.2 SSD Module
M.2 SSD Removal Procedure
1. Turn off the computer, turn it over, remove the battery ( page 2 - 6 ).
2. The M.2 SSD module will be visible at point on the mainboard ( Figure 4a ).
3. Remove the screw ( Figure 4b ).
4. The M.2 SSD module ( Figure 4c ) will pop-up, and you can remove it from the computer.
5. Reverse the process to install a new module (do not forget to replace the screws and make sure that the thermal
pad is attached).
1
2
3
4
b. c.
a.
2
3
1
3
4

3.M2 SSD Module
• 1 Screw
Figure 4
M.2 SSD Module
Removal
a. Locate the M.2 SSD.
b. Remove the screw.
c. The M.2 SSD module
will pop up.