1948344
V1.3
12 January 2022
Instruction Sheet Template - V1.2
–
Updated 06/10/2021
Installation:
A.
Surface Mount
1.
Disassemble the diffuser and LED panel.
2.
Pull the power cord through the
grommet.
3.
Fix the base to the surface.
4.
Connect the power cord.
5.
Assemble the LED panel and diffuser.
B.
Semi recessed Mount (special option)
1.
Cut a 320mm hole into the mounting surface.
2.
Disassemble the diffuser and LED panel.
3.
Place the metal frame above the hole in the
mounting surface.
4.
Pull the power cord through the grommet.
5.
Insert the base into the mounting hole and
attach to the frame with 2 x 4mm screws.
6.
Assemble the LED panel and diffuser.
Power Supply Connection, 240V, 50Hz:
Connect power to the fitting as shown.
ECLLED-LI
—MS ECLLED-LI- (no sensor)
Note: Link 1&2 for permanent on or use switch for on/off
Caution:
On many building sites, power circuits may be cut off in an uncontrolled and repetitive basis during
construction. As a result, any Exit & Emergency Units, on these circuits, will have their batteries
discharged or “cycled”. The battery in this fitting has been selected to give excellent long-life
performance in a controlled AS2293 testing environment. Excessive battery cycling will reduce through-
life performance and may lead to premature battery failure. Battery warranty claims, as a result of such
abuse, are specifically EXCLUDED from Clevertronics warranty terms.
Warranty:
For Product Warranty information and Terms and Conditions of Sales please refer to our website
http://clevertronics.com.au/terms-conditions-sale-australia-nz/