1948794
V1.1
18 April 2019
Installation:
This Odyssey Quantum LED Strip batten can be wall or ceiling mounted.
•
Refer Images below for the mounting hole and cable access.
•
Remove the diffuser.
•
Remove the cover plate and disconnect the LED strip connector. Unhook the lanyard
•
Position the batten in the desired location.
•
Mark out the fixing points on the mounting surface.
•
Install appropriate fixing hardware.
•
Route power supply cables through the access hole as the rear of the fitting or the ends if using
surface conduit (punch out the knock-outs in the plastic end caps)
•
Fasten the batten to the surface.
•
Terminate the supply cable to the terminals marked L, N and E (240V AC/50Hz)
•
Attach the cover plate to lanyard, Re-connect the LED strip connector and Re-attach the cover
plate onto the body of the batten.
•
Re-install the diffuser
Dimensions:
Warranty:
For Product Warranty information and Terms and Conditions of Sales please refer to our website
http://clevertronics.com.au/terms-conditions-sale-australia-nz/
PAGE INTENTIONALLY LEFT BLANK
