05
BEFORE YOU SET UP YOUR CLEVERSPA
®
If your WiFi signal is poor all over your garden, please
contact your internet provider for further assistance.
Before setting up your CleverSpa
®
with CleverLink
®
- find a strong WiFi signal
Before setting up your
CleverSpa
®
with LED Lights
DISTANCE FROM HOUSE
42
WIFI STRENGTH
STRONG
42
WIFI STRENGTH
FAIR
42
WIFI STRENGTH
WEAK
WIFI STRENGTH
STRONG
Check pack contents:
1. Mains Power Converter
2. RF Wireless Receive
3. LED Light strip
4. RF Remote Control
& CR2025 3V Battery
It is important to check your lights are
working before setting them up.
Please note: you must insert
the lights through loops on
the base of hot tub before
filling up with water
.
Before setting up outdoors
1. Setup your CleverSpa® on a solid, level, foundation avoiding sharp objects as they could damage the hot tub.
2. Ensure your CleverSpa® hot tub is plugged into an external mains socket, professionally fitted, with weather
proofing. We DO NOT recommend using an extension cable as this can be a fire risk.
3. Do not place your hot tub in direct sunlight, or over inflate it, as this will cause the hot tub to bulge in
areas as the PVC heats up in the direct sun. This bulging could also put additional stress on the internal
welds leading to a weld failure.
4. During filling, emptying or when in use, water may spill out. Install near to a drainage point capable
of managing the volume of water.
Before setting up indoors
1. Floor must be able to withstand weight of the CleverSpa
®
+ occupants.
2. Floor should be a non-slip, level surface.
3. Before placing your hot tub indoors, ensure suitable drainage is available and can be reached.
Carefully consider the placement of your hot tub before installation.
