background image

•   Those with history of heart disease, low/high blood pressure, circulatory system problems  

or diabetes should consult a doctor before using CleverSpa

®

. People using medication should 

consult their doctor before using the CleverSpa

®

. Some medications may cause drowsiness, whilst 

other medication may affect heart rate, blood pressure and circulation during use. 

•   Water in a CleverSpa

®

 should never exceed 

42°C (107°F)

. Operating temperatures between  

38-40

O

C (100-104°F)

 are considered safe for a healthy adult. Lower temperatures are 

recommended for younger children, and when use exceeds 10 continuous minutes. 

•   A max temperature of 42

O

C can be programmed for the water - Once cover is removed, water 

temperature will automatically drop as heat is released through evaporation. The additional 
2

O

C compensates for heat loss that may occur. Once you are ready to use, reduce maximum 

temperature to recommended 

38-40

O

C

 

(100-104°F)

 and ensure that temperature reading is no 

greater than 40

O

C.

•  Immediately get out of your CleverSpa

®

 if you feel uncomfortable or sleepy.

•   Do not turn CleverSpa

®

 on when it is empty. This could cause irreparable damage to pump system 

which would nullify any warranty period.

•  

To avoid damaging your pump & heating system during colder weather, your CleverSpa

®

 is fitted 

with 

365 FreezeGuard

 

Technology

. Set the temperature to 5

O

C, and this will prevent any water in 

the system from freezing.

•   Always add chemicals to jug of water to avoid strong fumes or violent reactions that may result  

in a hazardous chemical spray.

•   To avoid accidental resetting of thermal cut-out, this appliance must not be supplied through an 

external switching device, such as a timer, or connected to a circuit that is regularly switched on 
and off by the utility.

• 

 WARNING:

 Adequate drainage has to be provided to deal with overflow of water. 

• 

 

IMPORTANT:

 For set-up/installation, the surface must be smooth, flat, level and capable of evenly 

supporting the weight of the CleverSpa

®

, water and users e.g. 6 Person Square CleverSpa

®

 filled 

weight: 980kg (approx) plus combined weight of occupants.

It is the responsibility of the CleverSpa

®

 owner to assure integrity of the site at all times.

03

SAFETY INSTRUCTIONS

WARNING - PLEASE READ CAREFULLY!

Do not operate pump and heating system whilst the CleverSpa

®

 is empty. 

This can damage the system and void your warranty.

Summary of Contents for Monte Carlo

















Reviews: