![background image](http://html1.mh-extra.com/html/clever/clever-spa-paradiso/clever-spa-paradiso_instructions-manual_2623262012.webp)
12
CLEANING & STORING AWAY YOUR CLEVERSPA
HOW TO EMPTY YOUR CLEVERSPA
®
1.
Firstly, remove the CleverSpa
®
plug from the electrical mains.
2.
Remove the screw cap from the water outlet
(L)
(below the pump system of the CleverSpa
®
) ensuring
the Drainage Plug
(G)
is still inserted to prevent unexpected draining.
3.
Screw the inflation hose
(D)
onto the water outlet
(L)
and direct the open end of the hose appropriately.
4.
Remove the drainage plug from the outlet within the floor of the CleverSpa
®
, so the water can flow out.
5.
When the CleverSpa
®
is completely drained of water, you must operate the bubble function for 30
seconds to drain any remaining water from the pipeline.
6.
When draining has finished, remove the inflation hose
(D)
and replace the drainage plug
(G)
and water
outlet cap
(L)
.
HOW TO DEFLATE YOUR CLEVERSPA
®
1.
Locate the black two part air valve on the spa (see point 9) on ‘setting up your CleverSpa
®
’ item
(K)
.
2.
Fully unscrew and remove the rapid deflation air valve turning anti-clockwise
(K)
.
3.
Fold the spa away carefully to direct and remove as much air as possible through the open valve.
STORING YOUR CLEVERSPA
®
Make sure all the water is completely drained from the CleverSpa
®
and pump system. This is vital in
extending the life of your CleverSpa
®
. We recommend the use of a wet/dry vacuum to blow out or
suck up water from the CleverSpa
®
pipes and pump lines. Remove the filter cartridge.
CleverSpa
®
should be placed in the bag provided and stored in a dry place, ideally raised off the floor
and away from any extreme temperatures.
Please note
: Plastic becomes brittle and susceptible to breakage when exposed to subzero temperatures
and this can severely damage your CleverSpa
®
. Leaving your CleverSpa
®
outside and uncovered during the
winter months will void your warranty.
CLEANING THE WATER FILTER CARTRIDGE & MESH FILTER
If using your CleverSpa
®
2-3 times per week, we suggest that you change your
filter every 2 weeks to maintain the best performance.
1.
Remove the filter protector cover
(C)
and then remove the filter cartridge
(B)
.
2.
The filter cartridge can be rinsed periodically under a cold tap and reused.
However, if the filter cartridge remains soiled and discoloured the filter cartridge
should be replaced. If any holes are present in the paper filter or the paper
in the cartridge is noticeably worn, replace the filter with a new one before
further use. We
DO NOT
recommend the use of pressurised water to clean
any CleverSpa
®
filters.
3.
Replace the filter protector cover
(C)
over the filter cartridge
(B)
and attach to the filter connector
(N)
by turning it clockwise until hand tight.
To help to keep your water clean, check your filter cartridge every day.
To order filters and chemicals for your CleverSpa
®
, please visit: cleverspa.co.uk
FILTER
CARTRIDGE (B)
FILTER PROTECTOR
COVER (C)
SS19 6 Person Square CleverSpa IM_AW.indd 12
30/10/2018 15:30