background image

IMPORTANT SAFETY PRECAUTIONS

READ BEFORE USE

1. Use this device 

ONLY

 for the intended use described in this 

manual.

2. Do 

NOT

 use accessories which are not specified by the manufac

-

turer. 

3. Do 

NOT

 use the device if it is not working properly or if it is dam-

aged.

4. Do 

NOT

 use the equipment in places where aerosol sprays are 

being used or where oxygen is being administered.

5. Do 

NOT

 under any circumstances use the device on neonates.

 The meter and lancing device are for single patient use. Do not 

share them with anyone including other family members! Do 

not use on multiple patients!

 All parts of the kit are considered biohazardous and can 

potentially transmit infectious diseases, even after you have 

performed cleaning and disinfection.

For more information, please visit 

1.“FDA Public Health Notification: Use of Fingerstick Devices on 

More than One Person Poses Risk for Transmitting Bloodborne 

Pathogens: Initial Communication” (2010)
http://www.fda.gov/MedicalDevices/Safety/AlertsandNotices/

ucm224025.htm
2.“CDC Clinical Reminder: Use of Fingerstick Devices on More 

than One Person Poses Risk for Transmitting Bloodborne Patho-

gens” (2010) http://www.cdc.gov/injectionsafety/Fingerstick-

DevicesBGM.html

Summary of Contents for Voice+

























































Reviews: