31
METER MEMORY
Reviewing Test Results
Your meter stores 450 the most recent blood glucose test results
along with respective dates and times in meter memory. To enter the
meter memory,
start with the meter switched off
.
1. Press and release .
will appear on the display. Press again, and
the first reading you see is the last blood glucose
result along with date, time and the measurement
mode.
2. Press
to recall the test results stored in the
meter each time you press.
3. Exit the meter memory
After the last test result, press again and the
meter will be turned off.
If the meter is left idle for more than 5 seconds
after entering the memory mode, the meter then
will display the following message on the LCD.
This indicates that you can insert a test strip and
initiate a blood glucose test.
NOTE
Summary of Contents for Auto-Code Pro
