www.cleveracoustics.co.uk
4 Zone Mixer Amplifier series
User Manual
10
Connections
Speaker connections
Notes:
• Both the 4 - 16Ω and 100V terminals cannot be used at the same time.
• Impedances indicated in the figures represent the total speaker system (load) impedances.
• Loads presented to the amplifier must be equal to or greater than listed above. Speaker
impedances must be measured using a true impedance meter, do not standard multimeters.
Balanced XLR jack connection
Jack plug
Total impedance
81Ω (MA 4060MP)
41Ω (MA 4120MP)
Total impedance
167Ω (MA 4060MP)
83Ω (MA 4120MP)
WARNING!
Be sure to attach the supplied terminal cover attached after connection.
Because high voltage is applied to the speaker terminals, care should be
taken never touch these terminals to avoid electric shock.
All speaker connections should be made using bare wire or suitable insulated
crimp terminals. Please ensure no loose strands are present as these may
short across terminals causing damage to the amplifier.
