GAS PRESSURE ADJUSTMENT PROCEDURE
CAUTION: The following procedure, as well as other work on gas controls should be
performed only by a qualified service technician.
NOTE: Gas pressure adjustment is pre-set and rarely needs any adjustment
1. Remove gas pressure adjustment cover screw.
2. Operating gas pressure output should be regulated to 6" W.C. natural gas and 11" W.C. LP gas.
3. Turn gas pressure adjustment screw (under cover screw) clockwise to increase or
counterclockwise to decrease gas pressure.
4. Replace cover screw.
PILOT FLAME ADJUSTMENT PROCEDURE
CAUTION: The following procedure, as well as all other work on gas controls should
be performed only by a qualified service technician.
1. Remove pilot adjustment cover screw.
2. Turn pilot flow adjustment screw (under cover screw) clockwise to increase flame (see
below drawing for correct flame adjustment).
3. Replace cover screw.
19
