FOR YOUR SAFETY
WARNING
IMPROPER INSTALLATION, ADJUST-
DO NOT STORE OR USE GASOLINE
MENT, ALTERATION, SERVICE OR
OR OTHER FLAMMABLE VAPORS
MAINTENANCE CAN CAUSE
OR LIQUIDS IN THE VICINITY OF
PROPERTY DAMAGE, INJURY OR
THIS OR ANY OTHER APPLIANCE.
DEATH. READ THE INSTALLATION,
OPERATION AND MAINTENANCE
INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR SERVICING
THIS EQUIPMENT.
IMPORTANT
THE FOLLOWING POINTS ARE TO ENSURE THE SAFE INSTALLATION AND OPERATION OF
THIS EQUIPMENT:
ENSURE ALL GAS AND ELECTRICAL SUPPLIES MATCH RATING PLATE AND
ELECTRICAL STICKERS.
OBSERVE ALL CLEARANCE REQUIREMENTS.
DISCONNECT THE ELECTRICAL POWER SUPPLY TO THE APPLIANCE BEFORE
CLEANING OR SERVICING UNIT.
ONLY QUAL IFIED SERVICE TECHNICIANS SHOULD REPAIR THIS UNIT.
THE INSTALLATION AND CONNECTION MUST COMPLY WITH LOCAL CODES, OR IN THE
ABSENCE OF LOCAL CODES, WITH CAN/CGA-B149 INSTALLATION CODE OR WITH THE
NATIONAL DUEL GAS CODE, ANSI Z223.1-LATEST EDITION.
POST IN A PROMINENT LOCATION, INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE
USER SMELLS GAS. THIS INFORMATION SHALL BE OBTAINED BY CONSULTING YOUR
LOCAL GAS SUPPLIER.
THE APPLIANCE AND ITS INDIVIDUAL SHUT-OFF VALVE MUST BE DISCONNECTED FROM
THE GAS SUPPLY PIPING SYSTEM DURING ANY PRESSURE TESTING OF THAT SYSTEM
AT TEST PRESSURES IN EXCESS OF 1/2 PSIG. (3.45 KPA).
THE APPLIANCE MUST BE ISOLATED FROM THE GAS SUPPLY PIPING SYSTEM BY
CLOSING ITS INDIVIDUAL MANUAL SHUT-OFF VALVE DURING ANY PRESSURE TESTING
OF THE GAS SUPPLY PIPING SYSTEM AT TEST PRESSURES EQUAL TO OR LESS THAN 1/2
PSIG. (3.45 KPA).
RETAIN THIS MANUAL FOR FUTURE REFERENCE.
(11936) -1-
Summary of Contents for SGL-30-T4
Page 8: ......
