Cleveland CycleWerks ACE 250CC, User Manual, Page: 40 / 57

- 38 -
specification, replace immediately
with a new brake rotor.
Warning!
Do not drive immediately after
replacing any braking components.
Properly bleeding the braking
system is important and can not be
adequately covered in this context.
Rear brake light switch:
The front brake switch that
operated the rear brake light is
located below the brake lever.
Check periodically to make sure this
switch is operating properly.
Rear brake:
Rear drum brake, to adjust the
rear-­‐wheel brake pedal, set the
pedal to the most comfortable
position for driving by rotating the
pedal adjustment nut. Then, rotate
the free play adjusting nut (2) to
keep the free play (1) between
20-­‐30mm.
Free play
Adjustment nut:
Wearing limit of brake pads/shoes
and inner brake lining.
Your motorcycle is provided with a
brake lining wear limit indicator in
the rear brake. To check the wear of
the brake lining, do as follows:
Check for correct adjustment of the
rear brake.