Cleveland CycleWerks ACE 250CC, User Manual, Page: 12 / 57

- 10 -
Turning signal operation. When the switch is turned to left " "
position, the left turning signal lamp is lit and the indicator lamp on
instrument panel flashes. When the switch is turned to right "
" position,
the right turning signal lamp is lit and the indicator lamp on the instrument
panel flashes.
Warning:
Whenever you are going to change lane or make a turn, turn ON the turn
signal lamp in advance of making your desired action. After the lane change
or turn, turn the signal light OFF, by pressing in the center of the turn signal.
Horn button:
Press " " button and the horn will sound.
Right handlebar control system:
Engine kill switch :
The switch is a rocker switch, located on the top of the right handlebar
control panel, with the rocker shaft at the center of the rocker. When it is
pressed in " " start position, the switch is turned and the engine can be
started. It is an emergency switch.
If the switch is pressed in " " position, the starting circuit is completely cut
off and the starter motor cannot be started. Do not put the switch in this
position during driving.