background image

36

English

Installation Instructions

Important:

Check product for transport damage before 
installation!
Transport damage or surface defects will not 
be accepted after installation of the product!

Please assure before installation:

1.  The fl oor's carrying capacity must corre-

spond to a load of 300 kg/m².

2. The fl oor must be suffi  ciently leveled, i.e. it 

must be horizontal and even.

3. Flush the water supply circuits according to 

local regulations before installing.

4.  Possition service hatches (min. 600 x 600 

mm). Position service hatches so that parts 
such as blowers, pumps, valves, connector 
boxes and other connections and the water 
supply are always accessible and replace-
able. Removable side panels are ideal, for 
more information please ask your local dea-
ler for Cleopatra.

5.  An air grid (only for whirlpool with air sys-

tem) min. 150 cm² is mandatory. The air 
grid can be located in a neighbouring room. 
The air supply will be guaranteed without 
separat air gird if side panels for whirlpools 
were used.

Danger!

General:

• 

 The main switch must be set to "OFF" 
during cleaning and maintenance works.

• 

Maintenance and adjustment works must 
be carried out by experts only. 

• 

All service covers must be appropriately re-
installed after maintenance works.

• 

Any installed safety provisions or safety 
equipment may not be modifi ed or 
removed.

Note:

The whirlpool’s construction must not be 
changed. Only original components may be 
used.

Important:

Exafi ll

Caution! According to DIN EN 12764, a sui-
table safety device preventing backfl ow has to 
be installed by the customer. According to EN 
1717 this must at least consist of a HP safety 
combination or according to DIN 1988 of a 
pipe interrupter A1 at the respectively correct 
installation height.

The bath inlet function is sealed off at the facto-
ry when the bath rim option is not fitted

.

ATTENTION!

Do not use silicone containing acetic acid!

Acrylic or metal parts of the whirlpool can be 
damaged by the use of silicone containing 
acetic acid.
For the fl exible seals between the elements we 
advise to use schimmelwerende silicone kit. 
Despite this, and dependant on circumstances, 
colorchanges in the kit can happen. If cleaning 
does not bring the wanted result, the seals 
have to be exchanged. Renewing is not within 
our warranty.

The tub must be cleaned thoroughly with 
the handshower befor using or testing the 
whirlpool functions!

Perform and record leak and commissioning 
test according to EN 12764.

Optional Accessories

Hand grip #21940XXX for safe entry into the 
whirlpool.

Summary of Contents for Luxusline Duo Imaza 750

















































































Reviews: