56
16 Installation of sensors
1
180 ˚
180 ˚
2
Safety sensor
Temperature sensor
Insert a tension spring into a cable tube of a sensor. There is now
a connection between the steam generator and the cabin.
Connect the cable end of a sensor to the tension spring and use
the draw spring to gently pull the cable into the tube.
If the cable with sensor is still about 30 cm outside the wall,
provide the back of the sensor with silicone kit. Pull the last
remaining cable into the tube and press the sensor into place.
Remove the excess kit.
Summary of Contents for Cleo Steam Smart 90187003
