4
/ 9
No. 999-1009, Min’an Avenue, Xiang’an 18/20 Duerdin ,
Xiamen China 361006 Clayton VIC 3168
Tel: +86-592-5781288 Tel: +61-3-90176688
Fax: +86-592-5782298 Fax: +61-3-90176668
Email:
Email:
Website:
www.clenergy.com.cn
Website: www.clenergy.com.au
3
．
Safe Torques
Please refer to safe torques defined in this guide as shown below; In case power tools
are required, Clenergy recommends only low-speed tools. High-speed and impact
drivers increase the risk of bolt galling (deadlock). If deadlock occurs, you need to cut
fasteners please make sure that there is no load on the fastener before you cut it. Avoid
damaging the anodized or galvanized surfaces.
4. These steps should be applied for every stainless steel nut and bolt assembly.
