Installation Guide / Grounding System
1
Code-Compliant Planning and Installation Guide V 1.1 - Complying with AS/NZS1170.2-2011 AMDT 2-2016
The Clenergy PV-ezRack® Grounding system provides
important guide for installers to achieve earthing
continuity from PV modules to earthing cable. It
includes two important parts: grounding clips layout
design and grounding lug installation.
Please review this manual thoroughly before installing
PV-ezRack® Grounding system.
The PV-ezRack® Grounding system parts, when installed
in accordance with this guide, will be structurally
sound and will meet the AS/NZS1170.2:2011 Amdt
2- 2016 standard. During installation, and especially
when working on the roof, please comply with the
appropriate Occupational Health and Safety regulations.
Please also pay attention to any other relevant State or
Federal regulations. Please check that you are using the
latest version of the Installation Manual, which you can
do by contacting Clenergy Australia via email on tech@
clenergy.com.au, or contacting your local distributor in
Australia.
Product Warranty:
Please refer
website.
Introduction
Complying with all applicable local or national
building codes, including any that may supersede this
manual;
Ensuring that PV-ezRack and other products are
appropriate for the particular installation and the
installation environment;
Using only PV-ezRack parts and installer-supplied
parts as specified by the PV-ezRack project plan.
(substitution of parts may void the warranty and
invalidate the letter of certification);
Recycling: Recycle: according to the local relative
statute.
Removal: Reverse installation process.
Ensuring that there are no less than two professionals
working on panel installation;
Ensuring the installation of related electrical
equipment is performed by licenced electricians;
Ensuring safe installation of all electrical aspects of
the PV array, this includes adequate earth bonding of
the PV array and PV-ezRack® SolarRoof components
as required in AS/NZS 5033: 2021;
Verifying the compatibility of the installation
considering preventing electrochemical corrosion
between dissimilar metals. This may occur between
structures, fasteners and PV modules, as detailed in
AS/NZS 5033: 2021.
•
•
•
•
•
•
•
•
•
The installer is solely responsible for:
List of contents
Introduction
Tools & Component list
Installation Instructions
01
02
03 -07
- Introduction -
