HEXAGON 07.2019 en
8
4.4 Mounting option C.DRIVE
In order to make optimum use of the advantages of the CLEMENS C.DRIVE controller on the HEXAGON
cultivators, parts of the hardware provided for this purpose must be mounted on the respective cultivator frame,
depending on the equipment.
The 2 variants of the bracket shown are intended for this purpose.
Components from the C.CONNECT line (relay boxes, distribution boxes, etc.) are combined with components
from the C.MOTION group (control unit blocks, hydraulic blocks, flow dividers, etc.) and attached to these
brackets.
4.4.1 Mounting brackets for C.DRIVE components
Figure 5 Mounting brackets for C.DRIVE
Both holder variants can be attached to the base frame of the cultivator. Depending on the mounting situation,
these holders can be mounted either on the right or on the left (see Figure 6).
Figure 6 Mounting points of the brackets
The following pages show examples of how these components are mounted on the basic frame of the cultivator
with the control units and the hydraulic components.
2
1
