S-2R + Frontanbau 11.2018 en
13
With the aid of a mounting plate made especially for the S-2R column lifter, devices can be
attached similar to a front three-point to the existing Cat. 1 mounting points for the upper
and lower links. The lower link plates are adjustable in height. It is important to ensure that
when adjusting these plates always at least three holes match to ensure a secure connection
to the base plate.
Screw-on surfaces must be free of dirt and undamaged.
Figure 4 Mounting position three-point mounting on column lifter S-2R
The
front
mounting of the column suspension S-2R is carried out by means
of four screws on special mounting brackets (see chapter 10.3 Adapters and
brackets for front mounting).
