Clemco Spin - XL, Owner'S Manual

Page: 7 / 15

Page 7 of 15
X(m)= 10 x P(bar)
X
Dangerous area!
Without protective clothing keep out of
area of 10x of pressure.
A6-8
Activate air motor and blast pot.
A10
Open metering valve.
Air and blast media mixture comes out at
nozzle
A11
Adjust blast media at metering valve.
Blast media should only be visible as a
fine fog!
4 Instruction handbook
4.1 Operation
4.1.1 Standard operation
A1 Protect workplace. - Dust emission
- Noise
- Sped up blast media
X(m)= 10 x P(bar)
X
Dangerous area!
Without protective clothing keep out of
area of 10x of pressure.
Risk of escaping blast media.
Mortal danger!
Wear blast helmet, protective clothing,
cloves
A2 Position Spin-XL.
A3 Switch on. First air of air motor
Than air of blast pot
At last blast media.
A4
Pull back Spin XL.
According to request of degree of purifica-
tion.
A5 Switch off. First blast media
Than air of blast pot
At last air motor.
4.1.2 Shutdown
4.1.2.1 After end of work
No special activity. Observe instruction of complete system
4.1.2.2 Shut down by longer interruption of work or moving equipment
No special activity. Observe instruction of complete system
5 Maintenance and cleanse
5.1 General
Blast equipment subjects to strong wear. Safety and high efficiency is only ensured
when maintained regularly!
Maintenance cycles are strongly regulated by operating parameters. Stated times are experiences, that
have to be reduced or extended in individual case.