background image

15 in. Surface Cleaner Attachment

RY31SC01

WARNING:

To reduce the risk of injury, user must read and under-
stand the operator’s manual for their pressure washer 
before using this accessory. To reduce the risk of injury 
or property damage, spray the pressure stream in a safe 
direction to ensure proper connection of all accessories 
before starting any cleaning project. Fits most pressure 
washers. Ensure compatibility and proper fit before us-
ing this  accessory. Wear eye protection with side shields 
marked to comply with ANSI Z87.1. Risk of fluid injec-
tions; do not point at people, pets, electrical devices 
or the unit itself. Turn off the pressure washer before 
changing or adjusting accessories. For cold water use 
only.  Save these instructions. Refer to them frequently 
and use them to instruct other users. If you loan someone 
this tool, loan them these instructions also.

PRODUCT SPECIFICATIONS

Connections .............................1/4 in. Quick Connect Plug 
Deck Width ................................................................. 15 in.
Maximum Pressure ................................................ 3300 psi
Maximum Water Flow ................................................3 gpm
Maximum Water Temperature ....................................140°F

INSTALLING THE SURFACE CLEANER ON 
THE SPRAY WAND

See Figure 1.

n

  Insert the surface cleaner inlet plug into the spray wand 

quick connect coupler and secure.

WARNING:

To reduce the risk of injection or injury, only use the sur-
face cleaner on flat, horizontal surfaces. Never lift the 
surface cleaner from the cleaning surface while operating 
the pressure washer.

USING THE SURFACE CLEANER 

See Figure 2.

n

  Start the pressure washer as described in your pressure 

washer manual.

n

  Walk slowly behind the cleaning deck, cleaning as you 

go. 

 NOTE: 

If striping or swirling occurs, slow your pace. If 

striping or swirling continues, the surface cleaner nozzle(s) 
may be clogged. See 

Nozzle Maintenance

 for how to 

clean the nozzles.

Fig. 1

INLET  

PLUG

Fig. 2

QUICK CONNECT 

COUPLER

WARNING:

Striking any raised obstacle while using the surface 
cleaner will damage the unit. If contact does  occur and 
causes vibration when operating the pressure washer, 
stop and discontinue use. Continuing to operate the unit 
could result in serious injury or damage to the unit.

Reviews: