background image

iSmartATF 501 Auto Transmission Cleaner and Fluid Exchanger User’s Manual

2

Trademark Information

SMARTSAFE

is a registered trademark of SHENZHEN SMARTSAFE TECH. CO., LTD. (SMARTSAFE

for short) in China and other countries. All other SMARTSAFE trademarks, service marks, domain

names, logos, and company names referred to in this manual are either trademarks, registered

trademarks, service marks, domain names, logos, company names of or are otherwise the property of

SMARTSAFE or its affiliates. In countries where any of the SMARTSAFE trademarks, service marks,

domain names, logos and company names are not registered, SMARTSAFE claims other rights

associated with unregistered trademarks, service marks, domain names, logos, and company names.

Other products or company names referred to in this manual may be trademarks of their respective

owners. You may not use any trademark, service mark, domain name, logo, or company name of

SMARTSAFE or any third party without permission from the owner of the applicable trademark, service

mark, domain name, logo, or company name. You may contact SMARTSAFE by visiting SmartSafe at

http:// www.newsmartsafe.com, or writing to 3F, Building B, Qiao'an Technology Industrial Park, Guanlan,

Longhua New District, Shenzhen, Guangdong, P. R. China, to request written permission to use

Materials on this manual for purposes or for all other questions relating to this manual.

Copyright Information

Copyright © 2021 by SHENZHEN SMARTSAFE TECH. CO., LTD. All rights reserved. No part of this

publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,

electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of

SMARTSAFE. The information contained herein is designed only for the use of this unit. SMARTSAFE is

not responsible for any use of this information as applied to other units.

Neither SMARTSAFE nor its affiliates shall be liable to the purchaser of this unit or third parties for

damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident,

misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure

to strictly comply with SMARTSAFE operating and maintenance instructions.

SMARTSAFE shall not be liable for any damages or problems arising from the use of any options or any

consumable products other than those designated as Original SMARTSAFE Products or SMARTSAFE

Approved Products by SMARTSAFE.

General Notice

Other product names used herein are for identification purposes only and may be trademarks of their respective owners.

SMARTSAFE disclaims any and all rights in those marks.

Summary of Contents for iSmartATF 501






















Reviews: