STARTING AND USE INSTRUCTIONS
UBF 28 NEW
Rev. 00
27/04/09
Pag. 19/36
Bands used for lifting the machine up must have the same loading capacity as the
machine load. Handling operations must be done without causing a loss of stability
of the machine. Otherwise, the machine can be damaged or the operator can de in
danger.
FIORENTINI suggest to use authorized personnel (see § 2.3.) to handle the machine.
LOADING SYSTEM
4.2. STORAGE
The machine must be stored in a closed and dry place if not immediately installed in order to keep every part
safe.
Relative humidity must be lower than 80% and the storage temperature must be between 3°C
≤
t
≤
+ 45 °C
.
4.3. HOW TO UNPACK THE MACHINE
¾
Cut the straps paying attention to the back spring.
¾
Remove clips that join pallet and carton;
¾
in case of plywood box, please remove clips from both sides and basis of each panel:
¾
Cut the strips that hold the machine.
¾
Lay the machine on the floor.
4.4 HANDLING
THE
UNPACKED
MACHINE
4.4.1 Battery version machine:
¾
Check the machine and install the batteries if not already installed.
¾
For a brief transport of the machine, please disconnect the batteries cables and remove brushes; for
a longer transport, please use the original package of the machine.
PICTURE N° 4.2
